Neptune 4 Firmware Update. Neptune 4 Series Firmware Update via USB Fix Unresponsive Touch Insert the U disk that comes with the machine into the computer, and copy the"ELEGOO_UPDATE_DIR" folder of the corresponding machine to the root directory of the U disk There are two folders (0.8A and 1.2A) in the zip file, and you need to select the corresponding file according to.
Neptune 4 & 4 Pro Firmware Update V1.1.2.532023/12/15 r/elegoo from www.reddit.com
Align with the screw holes and the touch screen cable ports to snap the bottom cover, and use a 2.0mm Allen. After the update is completed, click [Settings-Info] on the touch screen to enter the information interface to check the updated firmware version number
Neptune 4 & 4 Pro Firmware Update V1.1.2.532023/12/15 r/elegoo
These were provided to me on November 11th, 2023 (11/11/2023). After the firmware update shows that it is 100% complete, power off the printer, pull out the memory card from the touch screen, and put the touch screen cable port into the groove (the side with the long "raised pillar" faces up) Preparation: Copy the Upgrade Folder to the root directory of the Udisk
Firmware Neptune 4 Plus r/elegoo. After confirmation, the printer will automatically "return to zero" Insert the U disk that comes with the machine into the computer, and copy the"ELEGOO_UPDATE_DIR" folder of the corresponding machine to the root directory of the U disk
Neptune 4 Plus&4 Max Firmware Update Guide PDF Computer File. After the update is completed, click [Settings-Info] on the touch screen to enter the information interface to check the updated firmware version number Update method 1: Upgrade by using the touch screen control.